Advantages of AGICO’s egg tray making machine
Low-cost raw materials, low unit product cost (mainly waste paper, wide sources, low price). We also provides 1,000-10,000pcs/h egg tray production lines.
Wide production capacity coverage: from 1,000 pcs/h (small machines) to 9,000-10,000 pcs/h (large complete lines), customizable according to customer output.
Reliable molding: Vacuum adsorption dehydration molding features high dehydration efficiency, low moisture content of the finished product, and stable molding.
Customizable molds: Molds can be customized according to samples or drawings. The same set of molds for different specifications can achieve a variety of products.
Key materials emphasize quality: for instance, pure copper motor wires, Japanese/Harbin bearings, Taiwan CAM distributors, 304 stainless steel, etc., to extend lifespan and reduce maintenance.
Diverse drying methods: natural drying/brick-built drying chamber/single-layer metal tunnel/multi-layer metal tunnel/box-type dryer (optional heat sources: coal, natural gas, diesel, heat transfer oil, steam, etc.), can be selected according to climate and scale to reduce energy consumption.
Egg tray making machines
1-side egg tray making machine
Also known as single-side rotary or small machine, it is suitable for scenarios with small production volume and natural drying. Advantages: Low investment, easy relocation, suitable for trial production or small-scale customers.
Learn More
4-side egg tray making machine
Medium and small production capacity type. Suitable for medium-scale production, with a balance between production capacity and cost, it is often used by customers in agriculture and animal husbandry.
Learn More
8-side egg tray making machine
The 8-sided machine has a large output and low drying cost (with relatively low humidity), and can be used for various pulp molded products (egg trays, fruit plates, cup trays, etc.). Some models can be used as semi-automatic or fully automatic production lines.
Learn More
12-side egg tray making machine
For high-volume and professional manufacturers. It is often used in automated production lines, and is matched with metal tunnels or multi-layer metal drying to meet the high-capacity drying requirements.
Learn MoreSpecifications of egg tray manufacturing machine
| Model category | Typical model production capacity (pcs/h) | Power (kW) | Mold quantity (pieces) |
|---|---|---|---|
| 1-SIDE (small) | 1,000/1,500 | 2.2 | 3/4 |
| 4-SIDE (medium and small) | 1,800-2,300/2,200-2,500 | 3 | 12/16 |
| 8-SIDE (medium and large) | 3,000-7,000 (graded) | 3-11 (by model) | 24-48 |
| 12-side (large) | 5,000-6,000 | ~11 | ~60 |
Why choose AGICO?
In 2024, the export value of egg tray machines from China reached 280 million yuan, representing a year-on-year growth of 10.2%. The main export destinations were Southeast Asia, Africa and South America, with Vietnam, Indonesia and Bangladesh being the top three. It is expected that the export volume will exceed 320 million yuan in 2025, representing a year-on-year growth of 14.3%. Why choose AGICO’s egg tray manufacturing machine?
Rich export experience
Equipment has been exported to over 20+ countries.
Complete range of models and customizable
Complete lines from 1,000 to 10,000 pcs/h and various drying solutions. Molds can be customized according to samples.
Quality and Certification
Obtained CE and ISO 9001 certifications; Use high-quality components (pure copper motor wires, well-known bearings, Taiwan CAM distributors, stainless steel, etc.).
Delivery and installation support
We offer system solution design, on-site installation and commissioning, free training and long-term technical support.
The materials are genuine and of high quality
For instance, the steel is brand new rather than recycled parts, and the chain and gear are heat-treated to enhance their wear resistance and service life, etc.
Our successful cases
What is an egg tray making machine?
The egg tray making machine, also known as the pulp forming machine, adsorbs the pulp onto the mold through vacuum adsorption for shaping. After dehydration, it is conveyed to the drying system and finally stacked and packaged. It is suitable for the production of molded paper products such as egg trays, egg boxes, fruit plates and cup holders.
Raw materials for egg trays
Common raw materials are divided into two categories: recycled waste paper (waste newspapers, corrugated boxes, white board paper, etc.) and virgin pulp/plant fiber (wood pulp, bamboo pulp, bagasse, straw, etc.). Recycled materials have a wide range of sources and low costs. Colored products can also be produced as required using colored pulp.
During the molding process, low-concentration slurry (about 1% or so) is usually fed into the mold for molding, followed by dehydration and drying to obtain the final product.
How does the egg tray making machine operate
Overall process: Raw materials → pulping → molding → dehydration/mold transfer → drying → trimming/stacking → packaging. Detailed steps
Pulping: Put the waste paper into a high-consistency hydraulic pulping tank, add water and necessary additives, and stir to form a pulp.
Slurry supply: After being filtered through a screen, the slurry is sent to the slurry supply tank/slurry supply system to maintain an appropriate concentration and uniformity.
Molding: The mold of the molding machine relies on vacuum suction filtration to make the pulp adhere to the surface of the mold and dehydrate to form the shape. The forming cycle is mostly several times per minute (for rotary machines, it is measured by the drum frequency).
Demolding and transfer: Once the thickness meets the standard, the wet products are removed from the forming mold with compressed air and conveyed to the transfer mold or conveyor belt to enter the drying system.
Drying: Natural sun-drying, brick-built drying rooms, single or multi-layer metal tunnels, box-type drying, etc. can be adopted. The choice depends on output, climate and fuel availability. After drying, edge trimming (trimming/cutting) and stacking packaging are carried out.
How to choose the best egg tray manufacturing machine?
When choosing a machine, it is recommended to make decisions in the following order:
Target output (per day/per hour) → Decide to choose 1-side / 4-side / 8-side / 12-side or the complete line model
Drying method and local climate: If the climate is dry, natural drying can be considered to save energy consumption. In high-yield or humid areas, metal tunnels/multi-layer drying should be selected and the fuel type (coal/gas/diesel/steam, etc.) should be considered.
Budget and ROI: For small customers, low-investment models can be given priority. For expansion, upgradable or complete production lines should be considered.
Land occupation and relocation requirements: If frequent relocation is necessary or the site is limited, it is preferred to choose an integrated and mobile small-sized model.
Mold and product specifications: Confirm the target product (number of trays, size, whether cup trays/fruit trays are needed, etc.). Whether the mold needs to be customized will affect the delivery time and cost.
After-sales and local services: Whether the supplier provides installation, commissioning, training and spare parts support (especially very important when purchasing from a different location).
FAQs That Customers Care About
What raw materials can be used?
Waste newspapers, corrugated paper, white board paper can be used, as well as virgin fibers (wood pulp, bagasse, etc.).
Why are there differences in the weight of the finished products?
It is affected by the mold specifications, slurry concentration, molding time and drying degree.
How to choose a drying method?
The selection should be based on the local climate (whether it is suitable for natural sun-drying) and production capacity (high-yield metal tunnels/multi-layer metal drying).
How long is the delivery date? How long does it take to customize molds?
The general delivery time is about 15 to 25 working days (it will be longer if custom molds are required).
Machine warranty/after-sales service and training?
We offer on-site installation and commissioning, free training and technical consultation, and claim to provide excellent after-sales service.
How do you compare the prices? What are the influencing factors?
The main factors to consider include production capacity, configuration, drying method, quality of key components, and whether installation/molds/logistics are included.
